2003 HYUNDAI XG350 FUSE BOX
Fuse Box - su Amazon
AdRisparmia su Fuse Box. Spedizione gratis (vedi condizioni)
Interior Fuse Box Location: 2001-2005 Hyundai XG350 2002
The video above shows how to replace blown fuses in the interior fuse box of your 2002 Hyundai XG350 in addition to the fuse panel diagram location.
2003 hyundai xg350 fuse box lay out - Fixya
wwwa›Forum›Cars & Trucks›Hyundai›XG3502003 hyundai xg350 fuse box lay out i need the fuse box lay out. the dash lights and the passenger side running - Hyundai XG350 questionHi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US. Here's a link to this great service Good luck!i have a 2002 caravan and the turnsiginals are only working inside the dash nothing outside has new bulbs and still nothing anyone any ideas?0chapmnfarm: your head lights use a "2" fuse system.
one for the left and one for the right.
The fuse box you are looking for is under the hood on the passenger's side. It is a black box roughly 8 inches long and 4-5 inches wide. When you remove the cover, you will see fuses and relays. What you are looking for is the section in the box which has a cluster of 7 fuses. 3 in one row and 4 in the other. On the outer parameter are two relays. The fuses you are interested in are located in the row of 4 fuses, with the two closest to the "L" shaped part of the box. Both of those should be 15 amp fuses.
The fuse below those should be a 20 amp which is the lighting switch and the one below it is a 15 amp which is for the interior lights and the clock.
Check your harness grounds in the engine compartment near the area you have the problem. There are ground wires which come out of the harness on both sides of the core support. The wires are black in color and have "EYES" crimped onto the ends of the wires. Both of them will probably be located about 4-6 inches below the upper tie bar on each side of the radiator. Odds are that the eyes will be large enough to pass a 6mm bolt through.
I hope what I have given you will resolve your problem. Lem me know,,good luck>>>>>>>>>>>>>>>0This bulletin supersedes TSB# 02-90-001.
The security system keyless adapter cable (SPX/Kent-Moore P/N 09900-21300) is a special service tool (SST) that is used for programming new keyless entry remote transmitters to the factory security systems. The keyless adapter is used in conjunction with the Hi-Scan Pro (with Hi-Scan SOL Pro Software Version 09-29-03 or newer) and Data Link Connector (DLC) Cable.
The keyless adapter cable can be used on the following vehicles:
2001 - 2004 MY Elantra
2001 - 2004 MY Santa Fe
2002 - 2004 MY Sonata
2001 - 2004 MY XG300/350
The 2003 - 2004 MY Tiburon does not need the Keyless Adapter Cable to add keyless entry remotes to the factory security system. Instead, the Hi-Scan Pro connects to the vehicle using only the DLC cable. See page BE-60 in the 2004 MY Tiburon Shop Manual for the latest instructions.
The most current Keyless Adapter Cable Instructions are available in the following shop manuals: SHOP MANUAL PAGES
2004 MY Elantra
BE-73 - BE-74
2004 MY Santa Fe
BE-43 - BE-44
2004 MY Sonata
BE-40 - BE-41
2004 MY XG350
BE-46 - BE-47
KEYLESS ADAPTER CABLE INSTRUCTIONS:
Connect the keyless adapter cable to the Hi-Scan Pro DLC cable.
Plug the keyless adapter into the vehicle's 10-pin multi-purpose connector located behind the driver's side lower instrument panel (next to the DLC).
Sample vehicle shown is the Santa Fe.
Turn the Hi-Scan Pro ON and press ENTER .
"Release date 29. Sep. 2003" OR LATER must appear on this screen. To update your SOL card with the latest software go to wwwervice and refer to TSB 00-00-001.
Select option "HYUNDAI VEHICLE DIAGNOSIS" and press ENTER .
Select vehicle model and press ENTER .
Select option "TRANSMITTER CODE SAVING" and press ENTER .
Ensure that the key has been removed from the ignition cylinder before proceeding.
Follow the steps noted on the Hi-Scan Pro screen to program the remote(s).
The factory security system can only be programmed to accept two remote transmitters and MUST be programmed for both remote transmitters at the same time.
Press ESC on the Hi-Scan Pro and verify that the remote(s) are functioning properly.
Turn the Hi-Scan Pro OFF and disconnect the adapter cable from the multi-purpose connector.0You tell us Jeep Cherokee (Laredo), in a Grand Cherokee subforum? I confussed. If this is a Cherokee, review the Repair Manual XJ Cherokee If this is Grand Cherokee, review ths Repair Manual ZJ-Secc-8W-Wiring-Diagrams (page 7, 9 and 10 for location, details and description). The diagramas can find it in the next pages.
I hope help yuo with this (remember rated this help). Good luck.1call Chrysler or get a book on them, it should tell you the outline of them.0